20,000 liter aircraft refueller tank truck
●This aircraft refueller is designed for fuelling all types of turbine-powered aircrafts
●The fuelling equipment includes all the necessary facilities and components to fuel aircrafts safely and efficiently.
●The fuelling equipment is mounted on a module base, which is easily removed from the rigid chassis and adaptable on any kind of similar chassis without the need of cutting or welding.
●The general design of the vehicle allows the operations to be completed easily and safely by one operator.
●The general design concept is simple for an easy maintenance and a use on flat airport fields at maximum 50 km/h.
Feature for refueller tank truck
●All components located in manner to provide the simplest possible pipe-work assembly allowing an easy access for removal, operation and maintenance
●Water separator filter manufactured to meet the API 1581 Fifth edition standard.
●Advanced electrical controlled or manual operated refuelling system.
●An intrinsically safe electro-pneumatic “deadman” control handle installed and act upon the secondary pressure control valve to interrupt flow.
●Advanced fuel tank design to ensure deposited water and impurity discharging.
●Piping system scientific designed to reduce fuel circuit resistance and static.
Safety for refueller tank truck
●A safety Interlock system is incorporated to apply the vehicle parking brake slowly to prevent abnormal motion.
●Deadman must be activated during refuelling to ensure operator on site.
●Deadman surpass available in case of deadman handle malfunction during refueling.
●Emergency evacuation switch for driving refueller away from aircrafts.
●Emergency stop button for shut down engine and refuelling once emergency
Norms and standards for refueller tank truck
●ISO 1825-1996 Rubber hose and hose fittings specification for aircraft refuelling and defuelling
● IATA AHM910 General Requirement for aircraft ground support equipment
● API 1529-82 Standards for Jet Fuel Quality Control at Airports – Aviation Fueling Hose
● API 1581-82 Specification and assessment procedure for aviation jet fuel separator
● NFPA 407 Aircraft Fuel Servicing
● IP Model Code of Safe Practice, part 7, Airports
● CEN (EN 12312-5 draft) Standard for Aircraft and Hydrant Pit Servicing Vehicles.
● Joint Guidelines Issue 11
●SAE ARP1247B General Requirements for Aerospace Ground Support Equipment
● SAE ARP1375 Minimum Safety Requirements for Special Purpose Airline
●ATA 103 Ground Support Equipment
●BS 3158-85 Rubber hose and hose assembly for aircraft refuelling and defueling